Fortworth Bonsai Society Blog


Signup & Login To Post A Blog

Jan. 29, 2023 @


February Bonsai

Feb. 02, 2021 in Bonsai

What happens when you miss a turn in removing wire from your bonsai? You get a large swelling in the branch that destroys the smooth taper you are working for. The only rule for removing wire is to start with the end of the wire and work down the wire completely to the other end, no jumping from wire to wire. To do this you have a choice-- you can untwist the wire or you can cut each loop. If you cut it is very easy to miss a loop. The only sure way is to develop a routine. Hold the tip with pliers while you cut the next loop, remove the cut loop, lay it aside keeping your eye on the cut end, hold the new cut tip and repeat. Do not get distracted and do something else. Following a routine keeps you on the one job. February is the start of the active cycle for bonsai, first the repotting when new growth is first evident, then the refinement process starts as soon as the green comes, all the while tending to the tasks of watering, feeding and watching for insects.

Spring is a long drawn out affair and each species has it's own time table in dealing with it. To be really successful in bonsai then, you must know what each species you have will need and how it responds to YOUR OWN backyard climate. If you have kept your trees from freezing they will want to start growing much earlier than those kept outside all winter. Typically, in my collection which stays outside, the elms will be first, foliage showing about the end of February or the first of March depending on the winter, along with the earliest maples. Then later in March, the rest of the maples and most of the others. The deciduous oaks will come out around April 1st. Out here in the country I am 2 or 3 weeks later than I was in town, 30 miles away. The timetable has to be your own set by watching the trees themselves. All bonsai functions should be done when your tree tells you that the timing is right.

Repotting 'can' be done at any time during the dormancy but new roots are susceptible to freezing so you have to have some place to protect them after repotting. If not repotting this year, you can help weed control by removing the top ΒΌof soil and replace it with new soil. The best time to repot the deciduous temperate zone trees is when the buds are just beginning to swell but before green is showing. Generally this will be before the last of the freezing weather. Trees that leaf out early, maples and elms, can withstand a few degrees of frost but if repotted you should protect the newly growing roots.Sometimes this just means setting them on the ground. Some species such as the oaks and willows are naturally programmed to wait much later so that there is very little chance to get nipped.

The newer wisdom on azaleas is that you also repot them at this time. The roots will be reestablished by blooming time. This is much easier on the tree than waiting until after bloom when the temperature will be hot. Before blooming starts you will be removing a lot of excess buds anyway which will reduce the stress on the tree at that time. Remove enough buds to allow the remaining flowers to have room to fully open. This should be done in late February or early March on the early blooming species (Karume) but may go later in March for the Satsuki types.

Refinement is the process that makes a well styled tree look great, developing fine ramification and obtaining smaller leaves. Part of the refinement starts as soon as new growth appears. Keep it pinched so you keep the internodes short and develop a compact set of twigs with small leaves on the branches. On alternate leaved species (e.g. Elms) pinch when the shoot gets 4 or 5 leaves. Fingernails or shears can be used. If the twig gets too long it will be tough and you have to use shears. On opposite leaved trees (maples) pinch the central shoot as soon as it can be distinguished from the two leaves. To do this really right you need to use tweezers with a dull point.

Development pruning is difficult for beginners in that to develop thickness you need to let the new branch grow wild which destroys the look of your 'bonsai'. You also will have long internodes which will not produce buds at the right places especially on the opposite leaved species. You need to do refinement pruning the first couple of times to get some short internodes and then let the tips go wild.

Spring flowering plants will have their buds set on last year's growth so pruning them will remove some flowers. Those that bloom later in the year will generally bloom on this year's growth. Pruning them will reduce the amount of flowers. In some cases such as crape myrtle, tip pruning of the branch will result in no flowers at all. In these cases you must decide which is most important, ramification or flowers. A compromise would be to prune the branch shorter than you normally would and then let it bloom on new growth which will at the proper length, at least for the first flowering of the season. When the growth starts the tree will need fertilizer. However, use one that has a small amount of nitrogen (the first number). The tree is naturally programmed to grow rapidly at this time so you don't need to encourage it further. Feed lightly to maintain a healthy green foliage. Ideally use an organic fertilizer which provides nutrients more slowly when the weather is cool. Trace minerals should be added to help with both the foliage color and the color of blooms.

If you have not used a horticultural oil, the time is fast running out. The oil would be used to kill scale and overwintering mites and other boogers. When new growth starts oil might damage the tender foliage. When new growth starts, the problems to look for are the above mentioned mites but especially aphids and mealy bugs. These can be controlled as well as giving the plants the required fertilizer by using an organic spray (1 tablespoon each of liquid kelp, liquid fish emulsion, apple cider vinegar (5%), and molasses in one gallon of water. Or use a commercial mix like Garrett Juice. All these are available in any organic nursery.) If leaf spot, mildew or any other fungal problems appear, use a baking soda (sodium bicarbonate), potassium bicarbonate spray or a commercial fungicide.

An important job which many neglect saying they are not going to show any trees is to detail their trees. This makes them look their best and that helps give you incentive to follow other good practices. Start by checking the branches. Prune any out of place or too long twigs. Remove any unnecessary wire, that is wire on limbs that have set in place. Treat any jin and shari that needs it. Then move down to the pot. Be sure it is clean and all lime deposits are removed. Steel wool works great to clean pots. A coating with a very light wax polish such as leaf shine will make the pot look good and helps keep the mineral deposits from forming. Then check the soil. It should cover the outer roots. The surface of the soil must be clean of any fallen leaves or other debris. Now it looks so good you might as well take it to a show.

By John Miller Reprinted From 2015


On Feb. 05, 2021 admin wrote:
John Millers reprinted articles for each month are always extremely informative and entertaining. There is valuable information to be gleaned from them. I plan to reprint his articles for the coming months and years.

Add A Comment

Fortworth Bonsai Society

President 2022 - Roger Spohn

Blog Calendar
   Prev January 2023 Next   
Sun Mon Tue Wed Thu Fri Sat
01 02 03 04 05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31



Popular Blogs

Earth Tribute Nov 2020
Live And Let Live Jan 2021
May Bonsai May 2021
April Bonsai Apr 2021

Latest Blogs

No Blogs This Month

Latest Members

 Woodmonkey61 Since Sep 2021
 Dave Manuel Since Sep 2021
 Fred Since Apr 2021
 Henry Since Apr 2021
 Blake Since Apr 2021
 Artemis Since Mar 2021

Latest Comments

 Robert Feb 2021
 admin Feb 2021
 Andrew Feb 2021
 admin Feb 2021
 Andrew Jan 2021
 Terry Jan 2021

Dunescape for Grimlochs FWBS Blog
Copyright © 2020 - 2023 All Rights Reserved
Theme Ported From FlatPress Blog by
Unique Visits:
Powered by PHP-Fusion Copyright © 2023 PHP-Fusion Inc
Released as free software w/o warranties under GNU Affero GPL v3
Copyright © 2023 - Fort Worth Bonsai Society.Org - Grimlochs FWBS Blog - All Rights Reserved